People + Cargo
In order to give a price, it is essential to know what type of forklift is needed, the number of stops, dimensions, speed and doors.
They are those elevators that are installed in the industries, there are mainly two types, one that is exclusively the movement of loads and another that allows accompanying the load by an operator. There are different sizes and loads, such as 50 kg, 300 kg, 500 kg, 1,000 kg, 1, 500 kg up to 10,000 kg .
Single-family hydraulic elevators are also incorrectly called dumbwaiters, because years ago loading platforms were installed in homes to connect two or more floors, a cabin was made and a pushbutton panel was placed in the cabin in a "homemade" way. The problem with this equipment is that they do not have the necessary safety systems to protect the user, with the consequent risk of accident.
This is a hydraulic platform lift that can be used for the transport of goods if used from the external plant buttons or for the transport of accompanied cargo, in which a qualified operator travels alongside the goods and is responsible for operating the lift.
Depending on the model, the Forklift for people and loads with automatic doors can transport goods from 1,000 kg to 2,000 kg, over a maximum travel of 12 m and with a nominal speed of 0.15 m/s.
They are a perfect alternative to the loading platforms on which the worker wants to climb at some point or recurrently to be able to accompany the load in complete safety.
The two-column forklifts are hydraulic platforms designed to lift loads from 1,500 kg up to 5,000 kg, for a maximum of 12 m of travel in a 2:1 ratio and with a nominal speed of 0.10 m/s.
This equipment operates with a drive system by means of an indirect thrust plunger type hydraulic cylinder, with a nominal pressure of 90 bar, and a three-phase electric motor.
They are designed with semi-pre-assembled 24 V electrical control, for two stops, by means of an electronic board, or with a programmable automaton for three or more stops and for special options such as iso-leveling, slat doors, etc.
The 1 column forklifts are hydraulic platforms manufactured to lift loads from 150 kg to 3,000 kg for a maximum of 12 m of travel in a 2:1 ratio.
For their operation, they use a drive system by means of a diver type hydraulic cylinder with indirect thrust, with a nominal pressure of 90 bar, and a three-phase or single-phase motor, depending on the model.
This equipment is designed with semi-premounted 24V electrical control, for two stops, by means of an electronic board, or with a programmable automaton for three or more stops and for special options such as isleveling, slat doors, etc.
As a general rule, they are hydraulic elevators, which usually operate at low speed, 0.1-0.2 m/s for large loads and 0.3-0.4 m/s for mini-loads.
This equipment is completely custom-made, being able to adapt to each space, it can have only the base of the platform or make side protections to prevent the fall or movement of the load.
Starting with the smallest ones, there are the mini-loads or dumbwaiters, used for small loads of 50 or 100 kg with cabins of up to 80 cm x 80 cm, used in restaurants, libraries, hotels, etc. Then there are the loading platforms, which exist of 1, 2 and 4 columns with which we can reach up to more than 10,000 kg. Scissor lifts are also available.
It is not common to sell second-hand used forklifts because in order to take advantage of them, they must have at least similar heights, and it is also essential to have the original documentation of the platform with the technical file and CE marking.
In order to give a price, it is essential to know what type of forklift is needed, the number of stops, dimensions, speed and doors.
Elevator installation in Alicante and Murcia.
We offer multiple possibilities for the installation of elevators in buildings without elevators; in stairwells, facades or patios.
Elevators, platforms and stair lifts, loading platforms and dumbwaiters.